North Coast Tool and Mold Corp.


	June 2011 Press Release
	AS9100 Rev. B. June, 2010
	ISO 9001/2008 June, 2010
	AS9100 Rev B. August 10, 2006
	ISO 9001/1994 August 10, 2006
	ISO 9001/1994 August 29, 2005

What is new at the Coast

NEW EQUIPMENT
Despite the slow economy, NCTM continues to make investments in machinery to meet expected industry needs

Bridgeport VMC-XP2000
With Probing/Inspection
Capacity X=78.7", Y=31.5",
Z=19.7"; High speed machining;
Spindle speed 15,000 rpm;
Contouring at 315" per minute

Johnford DMC 4000
With Probing/Inspection
Capacity X=160.0", Y=70.8",
Z=42.0" High speed machining;
Spindle speed 10,000 rpm;
Contouring at 315" per minute

DRIV™TECHNOLOGY
(Direct Resin Injection and Venting)

Invented by North Coast, DRIVTM Technology allows air trapped in the mold and the fabric to be evacuated, while the resin is infused in specific locations and under controlled sequences. The results are complete surface wet-out, stability of fabric placement, reduced mold deflection; and press sizes are reduced or eliminated entirely when coupled with out-of-press designs.

Our patent applications have been filed with the U.S. Patent Office for this innovative technolgy.

North Coast Tool and Mold Corp.
4605 Spring Road • Cleveland, Ohio 44131 • 216-398-8550 • Fax: 216-661-5777