Acquisition Press Release
ISO 9001:2008 + AS9100C
Low Pressure RTM PAPER
Press Release
JEC Americas 2014
ISO 9001:2008 + AS9100C
Press Release
AS9100 Rev B
ISO9001/2008
AS9100 Rev B
ISO9001/1994
ISO 9001/1994
 

NEW EQUIPMENT
Despite the slow economy, NCTM continues to make investments in machinery to meet expected industry needs

Bridgeport VMC-XP2000
With Probing/Inspection
Capacity X=78.7", Y=31.5",
Z=19.7"; High speed machining;
Spindle speed 15,000 rpm;
Contouring at 315" per minute

Johnford DMC 4000
With Probing/Inspection
Capacity X=160.0", Y=70.8",
Z=42.0" High speed machining;
Spindle speed 10,000 rpm;
Contouring at 315" per minute

 

DRIV™ TECHNOLOGY
(Direct Resin Injection and Venting)

Invented by North Coast, DRIV™ Technology allows air trapped in the mold and the fabric to be evacuated, while the resin is infused in specific locations and under controlled sequences. The results are complete surface wet-out, stability of fabric placement, reduced mold deflection; and press sizes are reduced or eliminated entirely when coupled with out-of-press designs.

Our patent applications have been filed with the U.S. Patent Office for this innovative technolgy.

 

 
 
 
 

 

North Coast Tool and Mold Corp.

North Coast an AGC AeroComposites company

4605 Spring Road • Cleveland, Ohio 44131 • 216-398-8550 • Fax: 216-661-5777

 

This document maintained by sales@nctm.com
Copyright © 2016 North Coast Tool and Mold Corp.